Thickness

Introduction

Thickness controls the width of the arc line in pixels. This value can be increased to make the line arc thicker.

Changing the thickness chnages the width of the arc's line

Thickness can be increased to create a wedge.

Increasing Thickness to create a wedge

Note that Thickness can be increased to any value including values larger than the radius of the arc. Large values can result in the arc rendering past its center point creating a bowtie shape.

Bowtie created by setting thickness to be larger than the radius of the arc

Other undesirable rendering effects can happen with large thicknesses when working with arcs which have one size (width or height) larger than the other, as shown in the following image:

Arck with the values Width=340, Height=160, Thickness=95 rendering incorrectly